The installation of LED Neon Signs can vary depending on factors such as the type of sign, the location, and the specific requirements of the installation site. Here are general guidelines for installing LED Neon Signs in different environments:
Install the Signs
1. Wall Mounted with Standoff Screws
1.Mark Hole Locations on the Sign:
2. Drill Pilot Holes
3. Insert Wall Anchors and Attach Standoff Screws
4. Mount the LED Neon Sign
and Secure the Sign with Decorative Covers
2. Hanging Mount with Cables
1. Use a pencil to mark the positions where the cables will be attached.
2. Drill holes
3. Insert Screw Archors & Fix Screws through Ceiling Plate
4. Push Hooks thru Eyelets/Holes,you can adjust the cable size
3. Handing Mount with Chain?
Our chain has two hooks, hook the holes/eyelets, and place the signs to anywhere you need, very easy.
For safe consideration,this method is only suitable for signs in less than 4kg
Color Chart & Controller
1.Static Neon Signs
Single color in one light.
Dimmer & Remote for adjusting the brightness
2. Dimmer & Remote for adjusting RGB Changing Color (7 Colors )
7 different colors in one light, 1 color shown at a time.
3. Spinning RGB
RGB Gradient Changing Color 21
+ different colors in one sign. More than 100 dynamic color effects
